|
Hello Everyone, I’ve been struggling with this issue for about two
days; hopefully it’s something trivial that has been overlooked. Basically, I have a Cisco 7940 handset running the SIP 7.1
firmware, which can place outbound calls to any destination, however It can not receive calls from hard/soft phones on the
network. Inbound calls through the IVR (Zap channel) are correctly
routed, phone rings, no problems there. All phones on the network are using the G711u codec, are on
RFC1918 address space, and do not traverse a firewall. For the life of me, I can’t seem to find a logical
answer for this one. Everything appears to be properly configured. I’ve even tried with “canreinvite=yes” to
see if the phones can talk directly to each other with the same results. Actual debugging output: -- Executing Dial("SIP/4002-1c9e",
"SIP/2000|20") in new stack -- Called 2000 -- Got SIP response 400 "Bad Request" back from
192.168.1.100 == No one is available to answer at this time Again, the problem is isolated to one specific handset,
everything else operates perfectly. Any help in this matter would be greatly appreciated, thank
you! Regards, Mark Brad Global ID Systems |
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
