RE: [Asterisk-Users] Access Bank II

[Tim McKee]

might want to check you port card and be sure you have fsx ports rather than fxo ports...     I'm running a II with stock configs and having no problems.   tim mckee From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mason Herring Sent: Sunday, October 10, 2004 3:14 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] Access Bank II I show an active channel in zttool when taking a line off-hook but * provides no dial tone. Any guesses?   From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mason Herring Sent: Saturday, October 09, 2004 9:04 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] Access Bank II   Here’s the zaptel configs. Ztcfg shows no alarms. Thanks for the help!   Zaptel Configuration ======================   SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1) SPAN 2: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)   Channel map:   Channel 01: FXO Loopstart (Default) (Slaves: 01) Channel 02: FXO Loopstart (Default) (Slaves: 02) Channel 03: FXO Loopstart (Default) (Slaves: 03) Channel 04: FXO Loopstart (Default) (Slaves: 04) Channel 05: FXO Loopstart (Default) (Slaves: 05) Channel 06: FXO Loopstart (Default) (Slaves: 06) Channel 07: FXO Loopstart (Default) (Slaves: 07) Channel 08: FXO Loopstart (Default) (Slaves: 08) Channel 09: FXO Loopstart (Default) (Slaves: 09) Channel 10: FXO Loopstart (Default) (Slaves: 10) Channel 11: FXO Loopstart (Default) (Slaves: 11) Channel 12: FXO Loopstart (Default) (Slaves: 12) Channel 13: FXO Loopstart (Default) (Slaves: 13) Channel 14: FXO Loopstart (Default) (Slaves: 14) Channel 15: FXO Loopstart (Default) (Slaves: 15) Channel 16: FXO Loopstart (Default) (Slaves: 16) Channel 17: FXO Loopstart (Default) (Slaves: 17) Channel 18: FXO Loopstart (Default) (Slaves: 18) Channel 19: FXO Loopstart (Default) (Slaves: 19) Channel 20: FXO Loopstart (Default) (Slaves: 20) Channel 21: FXO Loopstart (Default) (Slaves: 21) Channel 22: FXO Loopstart (Default) (Slaves: 22) Channel 23: FXO Loopstart (Default) (Slaves: 23) Channel 24: FXO Loopstart (Default) (Slaves: 24) Channel 25: FXO Loopstart (Default) (Slaves: 25) Channel 26: FXO Loopstart (Default) (Slaves: 26) Channel 27: FXO Loopstart (Default) (Slaves: 27) Channel 28: FXO Loopstart (Default) (Slaves: 28) Channel 29: FXO Loopstart (Default) (Slaves: 29) Channel 30: FXO Loopstart (Default) (Slaves: 30) Channel 31: FXO Loopstart (Default) (Slaves: 31) Channel 32: FXO Loopstart (Default) (Slaves: 32) Channel 33: FXO Loopstart (Default) (Slaves: 33) Channel 34: FXO Loopstart (Default) (Slaves: 34) Channel 35: FXO Loopstart (Default) (Slaves: 35) Channel 36: FXO Loopstart (Default) (Slaves: 36) Channel 37: FXO Loopstart (Default) (Slaves: 37) Channel 38: FXO Loopstart (Default) (Slaves: 38) Channel 39: FXO Loopstart (Default) (Slaves: 39) Channel 40: FXO Loopstart (Default) (Slaves: 40) Channel 41: FXO Loopstart (Default) (Slaves: 41) Channel 42: FXO Loopstart (Default) (Slaves: 42) Channel 43: FXO Loopstart (Default) (Slaves: 43) Channel 44: FXO Loopstart (Default) (Slaves: 44) Channel 45: FXO Loopstart (Default) (Slaves: 45) Channel 46: FXO Loopstart (Default) (Slaves: 46) Channel 47: FXO Loopstart (Default) (Slaves: 47) Channel 48: FXO Loopstart (Default) (Slaves: 48)   48 channels configured.   --zapata.conf--   [channels] ; ; Default language ; ;language=en ; ; Default context ; context=default signalling=fxo_ls group=1 channel => 1-48   --/etc/zaptel.conf--   span=1,1,0,esf,b8zs span=2,1,0,esf,b8zs fxols=1-48 loadzone = us defaultzone=us   From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Henry Devito Sent: Saturday, October 09, 2004 8:47 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] Access Bank II   Can you post your config’s please? At least the parts that pertain to your question.  It may help to figure out if there is a problem.   From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mason Herring Sent: Saturday, October 09, 2004 8:35 PM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] Access Bank II   I have a CAC Access Bank II with 2 T1 and 48 analog ports and am using an Asterisk server with 2 T100P cards. Both Access Bank and T100 cards have green lights. Zaptel.conf and Zapata.conf are configured for fxo loop start and I show 48 configured channels when doing ztcfg. When we take an analog line from one of the 48 ports off-hook I show an active channel in zttool but get no dial tone. Is there anyone with a similar setup that can help?   Thanks,   Mason Herring Delta Signal LLC

_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users