On Wed, 2004-10-13 at 15:06, James Bean wrote: > Sorry, I explained this wrong. > > I am wanting the callerid of the incoming caller from my > analogue line on the TDM400P to be passed TO the sip > phone so the sip phone display shows the phone number of > the incoming caler from the call on the TDM400P. > > It shows any callerid information from other sip phones > or extension calls fine.
I'm not sure, but try the following: a) Ensure you actually have the callerid service provided to your line, this is usually an extra charge from telstra (AFAIK) b) Add a wait(3) (maybe a 2 or 4 seconds is needed) before the noop c) Patch asterisk with this patch (I'm still waiting to be able to do this from a config file. This is what I use to allow asterisk to pass callerid *to* my analog FXS extensions. I assume it is the same for FXO lines. diff -ur asterisk/channels/chan_zap.c asterisk.mine/channels/chan_zap.c --- asterisk/channels/chan_zap.c Wed Sep 22 18:24:18 2004 +++ asterisk.mine/channels/chan_zap.c Wed Sep 22 18:24:41 2004 @@ -89,7 +89,7 @@ /* #define ZAP_CHECK_HOOKSTATE */ /* Typically, how many rings before we should send Caller*ID */ -#define DEFAULT_CIDRINGS 1 +#define DEFAULT_CIDRINGS 2 #define CHANNEL_PSEUDO -12 Obviously after the last one, you need to re-compile and re-install asterisk, and then re-start asterisk. Regards, Adam _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
