could you tell me how you changed the headset volumes ? does that option also work on snom 200s ?
Joachim
At 02:03 14/10/2004, you wrote:
Hi Sudhir,
I purchased couple of SNOM 190 phones last week. Connected them to the Asterisk server, and they seemed to work fine. However, after sometime they seem to lose registration with Asterisk as I can make calls but cannot receive calls.
We do not have these problems with the snom 190. It is probably a combination of your settings in sip.conf (maxexpirey & defaultexpirey) and the 'Proposed Expiry' of the snom (defaults to 1 hour, user_expiry1: 3600)
The headset (has Lucent's logo on them but look like Plantronics') would not work properly either. There is no audio on the other side whereas the same headset works great with GS HandyTone-Analog Phone combination. Finally, I tried putting an amplifier in the middle and now the headset works ok.
Do you have the original snom headset? Our snom headsets do not have any logo on it. One of the tech people from Snom told me they have a built-in amplifier for the microphone. Did you connect the headset to the special RJ connector? We also changed the volumes:
headset_device&: headset_rj
vol_headset_mic!: 8
vol_headset!: 15
In the beginning we had big problems with the headset because of an annoying buzzing sound. With help of Snom we figured out that a shielded UTP cable, connected to a grounded switch (or PC) solved this problem.
The handset keeps falling off the cradle. Very poor design IMO.
Yes, could be better, but not really annoying.
Regards, Joris
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
