Sibtay Abbas wrote:
Hi
I know this question has been asked before and i have
also checked the previous archives..but still in vain
Ok i am receving this message (Unable To retrieve DTMF
tone from INFO message) in asterisk console when i
send the following info message
INFO sip:172.16.0.32 SIP/2.0
Via: SIP/2.0/UDP 172.16.0.21
From: <sip:[EMAIL PROTECTED]>
To: <sip:[EMAIL PROTECTED]>
Call-ID: [EMAIL PROTECTED]
CSeq: 21 INFO
Content-Type: application/dtmf-relay
ContentLength: 26
Signal= 2
Duration= 250
6001 is basically my voice mail box number.
Is this all you have to sent in an INFO message?
Or the "Message Body" should contain the actual dtmf
tone.
There are a few problems with this message: at the very least,
"ContentLength" should be "Content-Length", and there should be a blank
line separating the headers and the message body. You should also make
sure that Content-Length is correct for the message body you're sending,
and that the lines are terminated with CR LF.
Tim
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
