----- Original Message ----- From: "Scott Wolf" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, October 19, 2004 9:00 AM Subject: Re: [Asterisk-Users] False Hangup detected on Digium TDM400P
| Ruben Fagundo wrote: | | > I have an asterisk server running on Redhat 8.0 with a Digium TDM400P | > w/4 FXO modules (TDM04P) | > | > There are 2 lines going into the Digium card. One line is a Vonage | > digital line, and the other line is a Comcast voice line. I have a SIP | > Grandstream 100 phone connected to the Asterisk server. | > | > The problem is that on occasionally, after talking for about 20 | > minutes or so, the call gets hung up and I get a fast paced busy | > signal. The caller gets dead air. I have called Digium wondering if | > their is a hardware problem, but they don't seem to think so. Is | > there a way to deactivate the other 2 channels, if they aren't being | > use. Perhaps having all 4 channels active is causing the false | > detects. The problem occurs on both lines for incoming calls and it | > just happened again today on an outgoing call after 15 minutes of talk. | > | > I have tried busydetect=no and yes and neither one make a difference. | > suggestions? | > | > /etc/asterisk/zapata.conf | > busydetect=yes | > busycount=10 | > | > | We have a 4 port FXO doing the exact same thing. Normally only happens | after a few minues, but today it happene 4 times on a call from England | after anywhere from 30 seconds to 10 minutes. | | Scott Wolf We also have a TDM04P (4xfxo) only problem we have experienced is failure to unload during reboot Greg _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
