Luke, I have a situation like yours, mine is to enable an IAX2 call between two servers and then break out to a trunk. All I have done is added a six digit code in front of the number (eg Birthdate ,210573 or 052173 if in US), and then stripted the six digits before dialing. You only tell the people you want to be able to dial out the six digit code.
Regards Dave -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Luke Catranis Sent: 20 October 2004 15:55 To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: [Asterisk-Users] Control access to external dialing Wondering if anyone could give me a tip on controlling access under the following scenario. I have an ATA connected to a legacy pbx as a trunk line. I want to control who can make calls on this trunk. I cannot set restrictions on the users via the pbx, so I would like to be able to assign a passcode for people so they can dial out using this trunk line... _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
