If this is call waiting on the CO line, I found to flash the CO line you have to (flash *0) to answer it. If it is another station calling your phone while you are on , a normal flash will do.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Nikhil Jogia Sent: Sunday, October 24, 2004 6:54 AM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] Call Waiting >Hi, > >I have just set up an Asterisk box.....it sure is a big job to get >everything perfect, especially when you have picky users. > >Anyway, the box has 2 X100P's and a couple of sipura spa-2000's >connected to the LAN. >1 of the lines connected to the X100P's goes straight to extension 1000 >after a short greeting. >Anyway, say ext 1000 is talking to ext 1001, and the line rings. Ext >1000 hears a small beep every few seconds. This is obviously call >waiting. >My question is how do I answer that incoming call whilst on a call? I >have looked around, tried *0 and even 0*, the flash key, but to no avail >:( If this is call waiting on the CO line, I found to flash the CO line you have to (flash *0) to answer it. If it is another station calling your phone while you are on , a normal flash will do. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
