Cirelle Enterprises wrote:
----- Original Message ----- From: "Steve Underwood" <[EMAIL PROTECTED]>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" <[EMAIL PROTECTED]>
Sent: Monday, October 25, 2004 9:21 AM
Subject: Re: [Asterisk-Users] Digium Wildcard T1 Compatibility
| >
| >for what it's worth, we were told to use RJ48C (Std Ethernet Cable)
| > | >
| RJ48C is *not* standard ethernet cable. The twisted pairs are grouped | differently. Ethernet cables work OK for T1s if they are only 2 or 3 | metres long. Long ethernet cables give high error rates when used for T1s.
|
According to the t1 techs I've been dealing with, a standard ethernet cable
will work (we have been using a 3 foot segment approx 1m) In fact the only
For such a short cable it will be OK.
configuration that lights all lights is a standard ether cable. T1 cross-over
doesn't create a proper link and lights on the t100p and smart jack indicate
a failed condition.
Surprise. Surprise. If you cross all the wires over. it doesn't work. :-)
Steve
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
