I'm having the same issue too. Just signed up, never had a problem before with a sipura box at a friends house configured as an extension off my Asterisk box. I'm behind NAT, and my firewall has the asterisk box configured as a DMZ, also I forwarded the sip and RTP ports just to be sure.
Anyone solve this one yet? I sent an email off to broadvoice but they were less than helpful. Tim Jackson <[EMAIL PROTECTED]> [2004-10-24 00:29:02 -0500]: > I'm having the same issue, and I'm not behind NAT. > > Maybe this is a BV issue? > > -Tim > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Terry > Evans > Sent: Saturday, October 23, 2004 4:33 PM > To: [EMAIL PROTECTED] > Subject: [Asterisk-Users] Asterisk and Broadvoice, no incoming voice > > I just signed up for the BroadVoice service a few hours ago, but for > the life of me I can't get any incoming voice. The incoming > connection is fine as it rings my extension from outside, but I can't > hear anyone talking. Outgoing voice is working fine though. > > I've been looking through the archives, but I haven't found a solution > to the problem yet. I even tried another router since someone had a > problem with that, but still no dice. > > I've had my Asterisk server running fine for a few months, but this is > the first time I've tried a VOIP service with it. I just downloaded > and installed the lastest CVS and the problem is still there also. > > Here's some of my configuration information: > > sip.conf (I've tried with nat=no and it didn't help) > > [general] > context=from-sip ; Default context for incoming calls > port=5060 ; UDP Port to bind to (SIP standard port is 5060) > bindaddr=0.0.0.0 ; IP address to bind to (0.0.0.0 binds to all) > maxexpirey=3600 > defaultexpirey=120 > callerid=No CallID > tos=lowdelay; 0x18 ; reliabile before > dtmfmode=inband > srvlookup=yes > ;progressinband=no > nat=yes > notifymimetype=text/plain > > [broadvoice] > type=friend > username=801527xxxx (hid real number) > fromuser=801527xxxx (hid real number) > secret=xxxxxxxxxxxx (hid real password) > fromdomain=sip.broadvoice.com > host=sip.broadvoice.com > canreinvite=no > dtmfmode=inband > context=broadvoice-inbound > nat=yes (tried nat=never also) > disallow=all > allow=ulaw > insecure=very > > I have the following ports forwarded to my linux server (it's behind a > NAT router): > > 5060, 20000-21000 (from my rdp.conf file), 4445, and 4569. All of > those have both TCP and UDP forwarded for now. > > I've tried several different combinations from different posts, > including splitting the broadvoice section up into parts for incoming > and outgoing, but it still didn't work. > > Anyone have any ideas? Let me know if traces, etc. will help and I'll > capture and post some. > > Thanks, > Terry > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
