I am connecting Asterisk to Asterisk to PSTN (Either by SIP or PRI) and
am having some issues dealing with busy signals. I have the HANGUPCAUSE
dial result macro in place to generate my hangup causes. I get a
hangupcause on my "gateway" machine with a code of 34, here's the code:
... -snip-
exten => hangupcause+34,1,Busy
It does in fact pass this on to the "IAD" asterisk machine as it saw the
following:
-- IAX2/x.x.x.x:4569/1 is busy
-- Hungup 'IAX2/x.x.x.x:4569/1'
== Everyone is busy/congested at this time
-- Executing Macro("Zap/2-1", "dial-result") in new stack
-- Executing NoOp("Zap/2-1", "HANGUPCAUSE is 0") in new stack
The last line doesn't make sense to me, if it knows it's a busy signal
why on earth would it use code 0? (code 0 is "NOTDEFINED") Is there
another
way to handle these calls?
This is in my extensions.conf, as an example:
exten => _.,1,Dial(IAX2/xxxx:[EMAIL PROTECTED]/${EXTEN})
exten => _.,2,Macro(dial-result)
On priority 2 I want to avoid using "Busy", makes sense?
Matt
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
