|
I had
lots of troubles getting my E100P and TDM400 working together. However
last night had success (except damn caller id)
My
eureaka (sp?) moment was when I read this (http://www.digium.com/downloads/configuring_zaptel.pdf)
Not
sure if this is the same problem for you but I didn't realise that although our
ISDN line only had 8 channels they still needed to be
counted.
Also
the ISDN cards MUST be configured before any others e.g. TDM400 in this
case.
e.g.:
#E100P
-
BT
span=1,1,0,ccs,hdb3,crc4 bchan=1-8 unused=9-15,17-31 dchan=16 defaultzone=uk #TDM400
fxoks=32-35 You
will obviously need to change the numbers as per you ISDN
channels.
Hope
this helps.
Alex
P.S.: Kudos should go the guy that helped me on
monday in the Freenode IRC channel with the BT line
settings.
This email and any attached files are confidential and copyright protected. If you are not the addressee, any dissemination, distribution or copying of this communication is strictly prohibited. Unless otherwise expressly agreed in writing, nothing stated in this communication shall be legally binding. |
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
