> Rich Adamson wrote: > > I'm trying to config a temp iax connection between two current * boxes. > > One is behind a firewall, the other uses a registered IP. > > > > I config'ed the * box behind the firewall to 'register' with the one that > > has a registered IP. The registration is occuring and the CLI indicates: > > -- Registered 'xxx2yyy' (AUTHENTICATED) at 1.2.3.193:50192 > > -- Registered 'xxx2yyy' (AUTHENTICATED) at 1.2.3.193:50262 > > > > However, I'm confused about the :50192 and :50262 port numbers shown > > above. I was expecting to see udp 4569 instead. > > > > I was hoping to use the registration process to avoid having to write > > a firewall rule allowing udp 4569 inbound. Am I off base or just missing > > something simple here? How do I force registration to use udp 4569 for > > both source and destination ports instead of the changing port numbers? > > The NAT router is translating the SOURECE port, which is perfectly fine.
Okay, I can buy that. But when I route an iax call from the registered IP * to the one hiding behind the firewall, the firewall gives an immediate icmp port unreachable as the call setup uses 4569/4569 ports (not the register ports). Maybe my Dial(IAX... is messed up then? _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
