Dear Khaled,
I thing you must read the documentation a little bit more deapely!
does zaptel compile ok ?
which kernel are you using ?
have you configure the zaptel.conf file
which parameters are you using for r2 signaling ?
refer to this page as guide for starting http://www.asterisk.org/index.php?menu=download read the all page
no lights aster wct4xxp means span is not configured!
good luck !
Jack
----- Original Message ----- From: "Abdelghani Khaled" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Sunday, October 31, 2004 12:04 PM
Subject: [Asterisk-Users] Can't install the mfcr2 support correctly
Hi Mr Jack, hi everybody
Thank you for your answer for my message titled "can't run ztcfg". I tried what you proposed me and the error I told about is not signaled. However I still have problems to get mfc/r2 support running.
I refered to the mfcr2 support documentation available in the opencall.org website http://www.opencall.org/installing-mfcr2.html .
The digium card I have is the TE410P
After installing the zaptel driver using the following commands:
make clean make install make config
After adding the necessary lines to the zaptel.conf file.
The problem is that when I execute the following command :
modprobe wct4xxp
which is necessary to run ztcfg correctly (as you told me) I get the 4 ports lights of the card off.
Yesterday I got them red.
And when I connect an E1 to a port I don't get a green light but I get either a red light (or no light at all) if the light was already red or no light if the light was already off.
I hope that my message is clear and that someone will help me.
_________________________________________________________________
MSN Hotmail : antivirus et antispam intégrés http://www.msn.fr/newhotmail/Default.asp?Ath=f
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
