Look at your logs in /var/logs/asterisk/. I am pretty certain it is a fault in your /etc/asterisk/Zapata.conf file.
Vikas -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Seth Remington Sent: Wednesday, November 03, 2004 1:01 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Installing X100P Asterisk - Unable to createchannel of type 'Zap' On Wed, 2004-11-03 at 13:02, Frank Kostin wrote: > Hello list, > I am trying to install a Digium X100P into a Redhat Asterisk. > Kernel seems to be OK, card OK. > Zaptel Configuration seems to be OK. > # ztcfg -vv > Channel map: > Channel 01: FXS Kewlstart (Default) (Slaves: 01) > 1 channels configured. > > Asterisk works fine with IP SIP but not with X100P > I get the error on Asterisk CLI> > .... channel.c:1919 ast_request: "No channel type registered for > 'Zap'" > and than ....app_dial.c:763 dial_exec "Unable to create channel of > type 'Zap'". > > Does anyone know what might be the problem ? > Thanks for any help Did you: modprobe zaptel modprobe wcfxo Also make sure that you compiled and installed zaptel *before* you installed asterisk. If you did it afterwords simply re-compile asterisk and you should be good. -Seth -- Seth Remington SaberLogic, LLC 661-B Weber Drive Wadsworth, Ohio 44281 Phone: (330)335-6442 Fax: (330)336-8559 _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
