Hi,
I connect a X100p in a Analog PBX extension.
If I want to call a analog extension (e.g.: using a softphone), the asterisk pick up the extension and dial perfectly.
If I call the extension where where the X100Pp is connected (inside the company), the asterisk doesn't answer the call.
I do: modprobe wcfxo debug=1 opermode=1
This message repeats lot of times: Setting hook state to 0 (0a)
But in syslog, I don't see the "RING!" and "NO RING!" messages. This is the outputs of the ztmonitor and audacity: http://www.ad2.com.br/asterisk/teste.wav.bz2 http://www.ad2.com.br/asterisk/teste.png.bz2
And the state of Zap channels is always offhook:
*CLI> zap show channel 1 Channel: 1 (...) InAlarm: 0 Signalling Type: FXS Kewlstart (...) Actual Hookstate: Offhook
If I disconnect the cable of the board, the hookstate changes to onhook. I made a lot of tests with tx and rx gain w/o success.
Thanks for any help.
Alexandre Arruda Paes
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
