--On Thursday, November 04, 2004 04:41:53 PM +0100 Peter Svensson <[EMAIL PROTECTED]> wrote:
It was 0, I changed it to 1, which seems to work better, but I have to check the settings of the other side with our telephony guysOn Thu, 4 Nov 2004, Kurt Bauer wrote:
> Is your timing source set correctly? If you are connecting to the pstn > the pstn connection should be the primary timing source.
connection is to a Ericsson MD110 wich is set as network, * is set as CPE.
Have you set the span as the timing source? (second number in the span line in zaptel.conf).
> > What does the missed interrupts counter in "cat cat /proc/zaptel/1" > say?
cat /proc/zaptel/1 Span 1: WCT1/0 "Digium Wildcard E100P E1/PRA Card 0" HDB3/CCS
1 WCT1/0/1 Clear (In use) 2 WCT1/0/2 Clear (In use) 3 WCT1/0/3 Clear (In use) 4 WCT1/0/4 Clear (In use)
Is there no IRQ miss counter for the E100P card?
??? I don't know.
Thanks, Kurt _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
