Just got a TDM22B. zaptel and asterisk checked out, compiled and installed OK on Slackware 9.1 with custom kernel 2.4.25.
BIOS has "Plug & Play OS Installed" set to "No". Everything else related to IRQs is "auto".
[EMAIL PROTECTED]:~# modprobe wcfxs
/lib/modules/2.4.25/misc/wcfxs.o: init_module: No such device
/lib/modules/2.4.25/misc/wcfxs.o: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.25/misc/wcfxs.o: insmod /lib/modules/2.4.25/misc/wcfxs.o failed
/lib/modules/2.4.25/misc/wcfxs.o: insmod wcfxs failed
[EMAIL PROTECTED]:~# cat /proc/interrupts
CPU0
0: 4788 XT-PIC timer
1: 2 XT-PIC keyboard
2: 0 XT-PIC cascade
11: 435 XT-PIC eth0
14: 3112 XT-PIC ide0
NMI: 0
LOC: 0
ERR: 0
[EMAIL PROTECTED]:~# dmesg
Zapata Telephony Interface Registered on major 196
Zapata Telephony Interface Unloaded
/proc/pci does not have an entry attributable to the TDM card. I have tried moving the card to a different PCI slot to no avail. If further information is needed, please let me know. I have no idea what else to try at this point.
-- Tom
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
