Rich Adamson wrote:
Polycom ships out two different phones , ones with H323,and one with
SIP
already loaded.
Thank you,
Steve Maroney
Correction, the polycom IP 500 ships without h.323 or SIP
software (it only has a bootrom on it), and software is only
distributed by polycom authorized VoIP partners. I have
personally taken issue with this as they advertise the
product as H.323 and SIP compliant, yet without additional
software it does not even know what SIP or H.323 are.
That's not right.
New phones come loaded with the current relevant firmware.
Upgraded f/w is only available to/from certified resellers.
Or look on the wiki for where it is freely available.
The two new 500's that were purchased from a Polycom reseller
actually came with no firmware installed at all; only the
bootloader (or whatever its called). Someone on this list pointed
me to a souce for downloading the sip image, and now I've got the
phone running, but it won't register with *.
Not sure what the registration problem is as yet, but doing a
sip debug indicates the registration failure. I double checked
the Auth UserID and Password and they appear to be correct. Seems
others on the list have had the same issue, but I've not found
any responses resolving the problem as yet. Anyone have any
suggestions?
Rich
Following works for me (I have a IP600)
At web interface (Registration1):
Display Name: Rich Adamson
Address: 1234 ;your extension
Auth User ID: 1234
Auth Password: 1234
Label: 1234
At sip.conf
[1234]
type=friend
username=1234
secret=1234
Hope this helps
Jorge Mendoza
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
