The distinctive ring was working ok until i arranged for the telco to turn on callerid: now the distinctive ring detection appears flaky and there is no callerid detected.
By flaky distinctive ring, I mean the three numbers that are being detected on an incoming call (ever since callerid was switched on), vary from [0,0,0] to more sensible numbers (sensible, though they still vary by too much to make sense of).
Once I have seen "callerID returned with error", but this only happened once and said nothing further. I haven't replicated this message when I have had the debugging cranked right up unfortunately.
There was a newspost a while back that suggested increasing a delay in callerid.c, which I have done but to no avail. I increased it from "4000" to "5600", as per the original post.
Does anyone have ideas for what to try, or for how to start digging further? This problem has been plaguing me for a month now.
Kind regards, Elliot.
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
