Hi Steve- Just wanted to make sure that you're aware of an earlier post regarding problems with Marconi, by Darren Storer I think:
Here it is: "Are you sure that NTL have provided you with a true Q.931 EuroISDN PRI circuit? If the circuit was supplied some time ago for use with existing equipment it may not be fully EuroISDN compliant. When connecting to Telcos that use Marconi (GPT) System X switches you must make sure that the circuit is using ISDN 110 and not ISDN 85. ISDN 85 is an older implementation of Q.931 in the UK and it does not work with Asterisk E100P or TE410P in my experience. When checking with NTL ask if your circuit is ISDN 110 or Q.931e or ETSI; these are the three names that are commonly used by UK carriers for full spec. EuroISDN PRI. " Regards Scott Stingel Scott M. Stingel President, Emerging Voice Technology, Inc. Palo Alto California & London England www.evtmedia.com -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steve Kennedy Sent: Tuesday, November 09, 2004 6:05 AM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: [Asterisk-Users] Marconi Sys X/TE410P configuration Has anyone got a working config for a Marconi System X (Q.931) and Digium TE410P? Steve -- NetTek Ltd Phone/Fax +44-(0)20 7483 2455 SMS steve-epage (at) gbnet.net [body] gpg 1024D/468952DB 2001-09-19 _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
