Yes to power connecter being plugged in, PCI 2.2, and tried other slots. I have tried the board in a brand new machine (that I can't use for asterisk) and windows finds the card.
>> I bought a Wildcard TDM400P earlier this week. >> >> I compiled the software from CVS and installed it. When ztcfg runs I >> get >> the error: >> >> ZT_CHANCONFIG failed on channel 1: No such device or address (6) >> >> After checking /proc/pci I don't see the board. Why wouldn't the >> board be >> showing up? Its in a slightly older machine (with an i440BX chipset) >> that >> any other PCI card I have works fine in. My brand new desktop sees it. >> >> Any ideas? > > Have to ask the obvious: Is the power connector plugged in? Actually, > I think the card should show up even if it's not plugged in, though. > Other questions: Is the motherboard PCI 2.2 compliant? I don't think > the TDM boards work with 2.1 or earlier. Have you tried it in other > PCI slots? Do you have any other machines to test it in? > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
