Hi, Can you tell me where I can source one of these units for $100 ?
If anyone who lives in the UK knows of a British supplier for these units, I'd really appreciate some info on that too. Thanks, Paul. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Geoff Nordli Posted At: 11 November 2004 19:55 Posted To: Asterisk-Users Conversation: [Asterisk-Users] Deploying multiple Sipura 3000s with Asterisk Subject: [Asterisk-Users] Deploying multiple Sipura 3000s with Asterisk I was thinking about using a couple of spa3k's for deployment in a small office. At 100 $US per unit it is very economical for three or four inbound lines plus a few analog phones. Can the FXO and FXS ports on a single spa3k be used at the same time through Asterisk? For example if I had an inbound call on the first Sipura FXO port and routed to the FXS port on the second device both devices would be in use. If another call came in on the FXO port on the second device would it be able to route it to Asterisk and to the first Sipura's FXS port. I am located in Canada. Can I pick up the Caller ID information coming in from the PSTN and pass it along to the destination device? I like the idea that the Sipura will fail over to the attached FXS port in the event that there is a failure. I am hoping this will minimize echo problems related TDM devices and motherboard timing. Is there any reason why this isn't an effective solution for really small businesses? Is there anyone doing this right now? Thanks, Geoff _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
