Thank you to all that have posted so far. I realize the X100p clones are designed as voice modems. But if they are designed for the UK market and are BABT / EU approved, should they not support UK impedance?
If these clone cards were capable of multiple impedance settings, how do we change Asterisk to take advantage of this (assuming we would have to make a change anyway for use with a TDM04B). Coincidentally I heard a rumour that the TDMxxx are not approves for use in the UK. Is this the case? Thanks again... Chris > I have an X100p interface (clone). The system works fine but I get > echo to a level where the system is all but unusable for IP PSTN. I > seem to remember reading somewhere that the UK line impedance is > different from the default compile and needs changing. I have > Wikied etc, but found nothing yet. The x100p (and presumably the clones) have an integrated circuit on the board that was manufactured for use in the US with 600 ohm pstn lines. The chip cannot be changed to any other impedance. However, there can be many different sources for the echo and impedance matching is only one of them. Others include: - incorrect * zapata.conf parameters - poorly engineered motherboards (eg, poor PCI bus, interrupt latency) For zapata.conf, try something like: echocancel=yes echotraining=800 For poorly designed motherboards, there is no consolidated list of which ones are good/bad so you're left with trying another one on your own to see if it impacts the echo. The TDM04B digium card (as an example) does not use that same pstn chip, but rather another one from the same chip manufacturer. That chip does have support for something like 18 different "country" telco standards. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
