> I just got a Grandstream 100 yesterday. I plugged it into my network and after a few seconds it showed the correct > time and date. After that I tried to access the built-in web server. After several tries I finally got the login screen. That > took about 10 tries before it displayed anything. Then I entered the default password 'admin' and clicked the Login > button. After that I got nothing. The phone still seemed to be working - I could press the Menu button and the menu > would come up and I could scroll through it. > > After trying that for awhile, I decided to try a firmware upgrade. So I entered the grandstream tftp server address into > the phone (168.75.215.189) and it did seem to do the upgrade. At least I think it did. The "P" entry in the revision > screen shows 1.0.5.16. There are lots of other revision numbers in there that I'm not sure about. > > I also tried changing out the ethernet cable, and plugging it into different ports on my Linksys switch (BEFSX41), but > nothing works. > > Do I just have a bad unit? Be carefull with assuptions regarding the Linksys. There were several different models (versions) of that hardware, and the early models did not support 100 meg ethernet worth a darn. Some packets make it through and a large number did not. Change the port speed on your phone to 10 meg (if you can) and try again. (I seen your post on the ping packet loss and that sort of reminded me of problems seen before.) Rich
Thanks for the feedback (and the reply from Dave Cotton as well). I'm going to try the phone on a completely different network and see what happens.
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
