The fax machines are connected to an Adtran 750 channel bank and then to the * machine with a T-1 crossover cable. I can fax from one machine to the other in this configuration without problems. zttool doesn't register any missed interrupts.
I'm using spandsp-0.0.1k The span-0.0.2pre4 doesn't work for me.
The logs all have the following:
... (faxing first page) >>>MPS: 4f HDLC underflow in state 13 Changed phase from 4 to 3 Slow carrier up/down/up/down, etc. <<<XCN: fa XCN with final frame tag In state 13 Disconnecting Changed phase from 3 to 7 Changed phase from 7 to 8 Hungup
While I was composing this email, I tried the fax again on the HP, and it worked. That tells me that the problem is intermittent and that there's nothing wrong with the document.
Where should I be looking? Should I put the fax machines on a TDM card to eliminate the T-1? Should I be trying to get the spandsp-0.0.2 version to work?
Thanks for your help. Mike
-- Michael Welter Introspect Telephony Corp. Denver, Colorado US +1.303.674.2575 [EMAIL PROTECTED] www.introspect.com _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
