Hi, o I purchased 3 TDM31B cards and fixed them in my computer (in 3 PCI slots)
o I downloaded the latest Zaptel source from CVS, compiled it and loaded modules zaptel.o and wctdm.o. o I successfully configured them from /etc/zaptel.conf as shown in the information below. ztcfg returned no errors - see the report below. o I successfully configured /etc/asterisk/zapata.conf (see info below). o I configured an X-Lite phone to test with an analog phone plugged into one of the channels. The problems are: o I cannot make a call from the analog phone (Saachi phone, KX-T3223) connected to one of the FXS ports. When I pick up the receiver, I hear the dialtone but when I press the buttons, asterisk seems not to get the numbers dialled, both using pulse and touch tone dialling. o I can call the analog phone from X-Lite however on receiving, I cannot hear much voice. What I hear is choppy sound corresponding to whatever I say from the analog side. When someone speaks from the X-lite side, nothing is heard from the analog phone. o There are three FXS ports where there is no dialtone - but the phone is actually powered - I can hear touch tone / pulse when I dial. o There are three FXS ports that give neither power nor dialtone. What could the problem be? Any help will be highly appreciated. Please find below abit of information I thought may be useful. Please let me know if more is needed. EXTRA INFORMATION ----------------- linux:/usr/src/new # uname -a Linux linux 2.4.20-4GB #1 Mon Mar 17 17:54:44 UTC 2003 i686 unknown unknown GNU/Linux linux:/usr/src/new # linux:/usr/src/new # ztcfg -vvv Zaptel Configuration ====================== Channel map: Channel 01: FXO Loopstart (Default) (Slaves: 01) Channel 02: FXO Loopstart (Default) (Slaves: 02) Channel 03: FXO Loopstart (Default) (Slaves: 03) Channel 04: FXS Loopstart (Default) (Slaves: 04) Channel 05: FXO Loopstart (Default) (Slaves: 05) Channel 06: FXO Loopstart (Default) (Slaves: 06) Channel 07: FXO Loopstart (Default) (Slaves: 07) Channel 08: FXS Loopstart (Default) (Slaves: 08) Channel 09: FXO Loopstart (Default) (Slaves: 09) Channel 10: FXO Loopstart (Default) (Slaves: 10) Channel 11: FXO Loopstart (Default) (Slaves: 11) Channel 12: FXS Loopstart (Default) (Slaves: 12) 12 channels configured. linux:/usr/src/new # /etc/zaptel.conf: fxols=1-3 fxols=5-7 fxols=9-11 fxsls=4,8,12 loadzone = us defaultzone=us /etc/asterisk/zapata.conf: [channels] signalling=fxo_ls echocancel=16 echocancelwhenbridged=yes is in milliseconds pulsedial=yes group=1 context=default callprogress=yes busydetect=1 busycount=7 relaxdtmf=yes channel => 9-11 channel => 1-3 channel => 5-7 signalling=fxs_ls group=2 context=incoming channel=> 4,8,12 Gerald. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
