Hello all,
>* However, when i set my Cisco ATA to G711, i
can't hear any sound unless I press at least two or three keys(any random
keys). I am using the demo context of >extension.conf file. Can that be due
to a fast start problem? Anyone knows how to checkthe faststartcapabilities of
an ATA 186?
Funny enough when i disabled the gsm, g729, g723 codec, it works fine (no
need to press any key), with the alaw and the ulaw codec. I guess the ATA
default to the alaw and the ulaw when it does not find the other codecs, However
that is a lot of bandwidth i am wasting ...
Before i licensed the g729 codec, is there a way i can "test" it?
Many Thanks
Kido
----- Original Message -----
Sent: Sunday, November 14, 2004 3:36
AM
Subject: [Asterisk-Users] Cisco ATA and
G729
Hi all,
I am new to asterisk. I was able, but not without
pain to install it on a FreeBSD box. I set up a cisco ATA 186 and the SJlabs
softphone to work with the PBX.
Three remarks:
* On the SJphone, i use the GSM and the G711
(ulaw and alaw) codec. In the h323.conf file i enabled those codec. Everything
works great!!!
* However, when i set my Cisco ATA to G711, i
can't hear any sound unless I press at least two or three keys(any random
keys). I am using the demo context of extension.conf file. Can that be due to
a fast start problem? Anyone knows how to checkthe faststartcapabilities of an
ATA 186?
* Also when i set my ATA codec to g729 and
in asterisk i allow=g729, i get a very low weird sound. What is that due to? I
am guessing that i don't have the codec installed on the system. Is there an
open source g729 codec available for FreeBSD?
Any help will be very much
appreciated,
Thanks.
Kido
_______________________________________________
Asterisk-Users
mailing
list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To
UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
