[Asterisk-Users] Timing Question:) (Loop/Internal etc).

[Chris Modesitt]

Okay, I admit most of my T1 knowledge comes from the Cisco world so please don’t castrate meJ  I have several T1’s running point-to-point between our Cooperate office and our Branch offices, our service provider dose not provide Loop timing on any point to point T1’s.  So typically when I would setup a point-to-point link with Cisco equipment I would set one side to Loop timing and the other side to internal, this prevents timing drift and the T1’s function perfectly.   What I am trying to setup is an * server on one side and a pbx on the other aka * à PBX.  The PBX only has the option of Loop timing so I set the asterisk card to use no timing (hoping that this is the same as setting a Cisco for internal timing).   However with my T1 analyzer I am seeing lots of drift in the T1, this causes periodic voice quality issues etc.   Question # 1: Is asterisk capable of providing the T1 timing.   Question # 2: If asterisk is not capable of providing the timing and the PBX is not capable of providing the timing are there any creative work arounds.   Thanks   Chris

_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users