Hello all... Again, I removed the Promise card as Eric suggested and it did take away the beeps on the lines. Happy day.
But I still have the phantom rings. Anyone have any ideas on this one. Thanks, Mike On 11/9/04 4:37 PM, "Eric Wieling" <[EMAIL PROTECTED]> wrote: > Mike Coakley wrote: >> Hello All, >> >> I originally send this message a little while ago. I realize that if anyone >> had any input they would have commented but maybe... Just maybe someone that >> could have commented missed it so I am resending it. >> >> I also figured (since I forgot it the first time) the version of Asterisk I >> am running (I'm such a dope sometimes). >> >> Asterisk CVS-HEAD-10/15/04-15:45:16 >> >> Thanks, >> >> Mike >> >> ------ Forwarded Message >> From: Mike Coakley <[EMAIL PROTECTED]> >> Date: Thu, 04 Nov 2004 19:16:27 -0500 >> To: "Asterisk Users Mailing List - Non-Commercial Discussion >> <[EMAIL PROTECTED]>" <[EMAIL PROTECTED]> >> Subject: TDM400P and some problems >> >> Hello all, >> >> I have 2 TDM400P in a P4 2.4Ghz system with 512MB ram. The motherboard is a >> Intel D865GBF with the latest firmware/BIOS. I have 4 FXO modules on each of >> the TDM400P cards. Also in the system is a Promise FastTrax 100TX2 Pro card >> for IDE RAID 1. There are no other PCI cards in the system. The D865GBF MB >> only really has a single PCI bust but and card on one of the six slots can >> be a bustmaster card. So far Digium has been not very diagnostically helpful >> and has sent me new cards to try to correct the problems, but the new cards >> didn't help in any way. >> >> We are using 5 channels of the available 8. We are using Pingtel SIP phones >> and Budgetone SIP phones for handsets. >> >> Here are my 2 problems that I can not get to go away: >> >> 1. At what seem to be random times there is a beeping noise generated >> towards the remote end. The noise sounds like a tone that is generated if >> the conversation is being recorded and this is upsetting our clients so I >> really need to get this one fixed. >> >> After reading about everything I could get my hands on I started moving the >> cards around in the PCI slots. Almost every combination did not help. I have >> also modified the PCI latency priorities to make the TDM400P cards the >> highest in the system. I have ensured that there is nothing sharing the >> IRQ's that the cards are using. I've monitored the system and it does appear >> to be system usage dependant but doesn't seem to have anything to do with HD >> activity. I'm at a loss. >> >> 2. Again, what seems to be a random pattern we get "phantom" calls on our >> lines. What I mean by this is... The line will ring, Asterisk processes the >> call as if it were a real incoming call. If someone answers the call you get >> nothing but a dial tone. I've played with different FXO signallings >> (Loopstart and Kewlstart are the only 2 that seems to even load) but I'm a >> TDM idiot and I'm not sure what I should be using. (I'm in NYC Metro area - >> so Verizon is LEC.) If I use Kewlstart I seem to get a lot more "phantom" >> calls but the call processing on real calls is better. Meaning that >> on-hook/off-hook detection seems better. If I use Loopstart, I do seem to >> get less calls but when the remote caller hangs up the line just sits there >> and Asterisk holds the Zap channel. It will eventually hangup but it is WAY >> to long. Again, I'm at a loss. > > Messages in the mailing list archive indicate some people have had > similar problems with Promise RAID. Getting rid of the Promise RAID > fixed their problems. > > --Eric > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
