Derek & Co., I hope this helps, this is the script I put into slot 2.
Thank you for your help and patience. --Rob
;
; Begin with the preamble requirements
;
DESCRIPTION "Asterisk PBX" ; Name of vendor
VERSION 0x00 ; Version of stuff
;SECURITY "_AST" ; Security code
SECURITY 0X78921D49 ; Security code
FDN 0x85EFD9DA ; Descriptor number
;
; Asterisk default ADSI script
;
;
; Flags
;
FLAG "nocallwaiting"
;
; Predefined strings
;
DISPLAY "titles" IS "** Asterisk PBX **"
DISPLAY "talkingto" IS "Call active." JUSTIFY LEFT
DISPLAY "callname" IS "$Call1p" JUSTIFY LEFT
DISPLAY "callnum" IS "$Call1s" JUSTIFY LEFT
DISPLAY "incoming" IS "Incoming call!" JUSTIFY LEFT
DISPLAY "ringing" IS "Calling... " JUSTIFY LEFT
DISPLAY "callended" IS "Call ended." JUSTIFY LEFT
DISPLAY "missedcall" IS "Missed call." JUSTIFY LEFT
DISPLAY "busy" IS "Busy." JUSTIFY LEFT
DISPLAY "reorder" IS "Reorder." JUSTIFY LEFT
DISPLAY "cwdisabled" IS "Callwait disabled"
DISPLAY "empty" IS "asdf"
;
; Begin soft key definitions
;
KEY "callfwd" IS "CallFwd" OR "Call Forward"
OFFHOOK
VOICEMODE
WAITDIALTONE
SENDDTMF "*60"
GOTO "offHook"
ENDKEY
KEY "vmail_OH" IS "VMail" OR "Voicemail"
OFFHOOK
VOICEMODE
WAITDIALTONE
SENDDTMF "6500"
ENDKEY
KEY "vmail" IS "VMail" OR "Voicemail"
SENDDTMF "6500"
ENDKEY
KEY "backspace" IS "BackSpc" OR "Backspace"
BACKSPACE
ENDKEY
KEY "cwdisable" IS "CWDsble" OR "Disable Call Wait"
SENDDTMF "*70"
SETFLAG "nocallwaiting"
SHOWDISPLAY "cwdisabled" AT 4
TIMERCLEAR
TIMERSTART 1
ENDKEY
KEY "cidblock" IS "CIDBlk" OR "Block Callerid"
SENDDTMF "*67"
SETFLAG "nocallwaiting"
ENDKEY
;
; Begin main subroutine
;
SUB "main" IS
IFEVENT NEARANSWER THEN
CLEAR
SHOWDISPLAY "titles" AT 1 NOUPDATE
SHOWDISPLAY "talkingto" AT 2 NOUPDATE
SHOWDISPLAY "callname" AT 3
SHOWDISPLAY "callnum" AT 4
GOTO "stableCall"
ENDIF
IFEVENT OFFHOOK THEN
CLEAR
CLEARFLAG "nocallwaiting"
CLEARDISPLAY
SHOWDISPLAY "titles" AT 1
SHOWKEYS "vmail"
SHOWKEYS "cidblock"
SHOWKEYS "cwdisable" UNLESS "nocallwaiting"
GOTO "offHook"
ENDIF
IFEVENT IDLE THEN
CLEAR
SHOWDISPLAY "titles" AT 1
SHOWKEYS "vmail_OH"
ENDIF
IFEVENT CALLERID THEN
CLEAR
; SHOWDISPLAY "titles" AT 1 NOUPDATE
; SHOWDISPLAY "incoming" AT 2 NOUPDATE
SHOWDISPLAY "callname" AT 3 NOUPDATE
SHOWDISPLAY "callnum" AT 4
ENDIF
IFEVENT RING THEN
CLEAR
SHOWDISPLAY "titles" AT 1 NOUPDATE
SHOWDISPLAY "incoming" AT 2
ENDIF
IFEVENT ENDOFRING THEN
SHOWDISPLAY "missedcall" AT 2
CLEAR
SHOWDISPLAY "titles" AT 1
SHOWKEYS "vmail_OH"
ENDIF
IFEVENT TIMER THEN
CLEAR
SHOWDISPLAY "empty" AT 4
ENDIF
ENDSUB
SUB "offHook" IS
IFEVENT FARRING THEN
CLEAR
SHOWDISPLAY "titles" AT 1 NOUPDATE
SHOWDISPLAY "ringing" AT 2 NOUPDATE
SHOWDISPLAY "callname" at 3 NOUPDATE
SHOWDISPLAY "callnum" at 4
ENDIF
IFEVENT FARANSWER THEN
CLEAR
SHOWDISPLAY "talkingto" AT 2
GOTO "stableCall"
ENDIF
IFEVENT BUSY THEN
CLEAR
SHOWDISPLAY "titles" AT 1 NOUPDATE
SHOWDISPLAY "busy" AT 2 NOUPDATE
SHOWDISPLAY "callname" at 3 NOUPDATE
SHOWDISPLAY "callnum" at 4
ENDIF
IFEVENT REORDER THEN
CLEAR
SHOWDISPLAY "titles" AT 1 NOUPDATE
SHOWDISPLAY "reorder" AT 2 NOUPDATE
SHOWDISPLAY "callname" at 3 NOUPDATE
SHOWDISPLAY "callnum" at 4
ENDIF
ENDSUB
SUB "stableCall" IS
IFEVENT REORDER THEN
SHOWDISPLAY "callended" AT 2
ENDIF
ENDSUB
On Tue, 2004-11-16 at 20:26, [EMAIL PROTECTED] wrote:
> Maybe you should post the ADSI script your using so we can actually see what
> it is your doing.... Without that... there's not much more that we can
> suggest.
>
> Regards,
>
> Derek Bruce
>
>
> ----- Original Message -----
> From: "Rob Emanuele" <[EMAIL PROTECTED]>
> To: "Kyle Sheumaker" <[EMAIL PROTECTED]>
> Sent: Tuesday, November 16, 2004 5:14 PM
> Subject: [Asterisk-Users] Using a Aastra/Nortel 390 Phone with Asterisk
>
>
> > Hi Kyle,
> >
> > I came across one of your posts in the Asterisk users archive. Forgive me
> > for intruding but I haven't seen you on the list recently but I was hoping
> > you had some insight into a problem I was having with an ADSI phone.
> >
> > You had apparently gotten a US West phone (a Nortel 390) to work and I may
> > have that very same phone. I managed to do a factory reset on it and
> > programmed it with the default asterisk script into slots 1 & 2. The
> > programming looks correct, Yet, I cannot get the phone to display an idle
> > banner eg. when the phone is on hook all I show on the display is the time
> > and date.
> >
> > Any help you have would be appreciated.
> >
> > Thank you,
> >
> > Rob Emanuele
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > [EMAIL PROTECTED]
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> Asterisk-Users mailing list
> [EMAIL PROTECTED]
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
