Marty Lee wrote:
I'm having problems with an FXS module on a TDM400P card with asterisk telling me:
-- Zap/4-1 is ringing Exception on 19, channel 4 Got event Ringer On(10) on channel 4 (index 0 Exception on 19, channel 4 Got event Ringer Off(11) on channel 4 (index 0) Didn't finish Caller-ID spill. Cancelling.
and no subsequent caller id on the handset. If I use the same handset on a Grandstream 286 device, the caller id stuff works fine.
I guess that the duration of the gap between rings isn't sufficient for the callerid to be sent, but can't find a way of tuning that.
Check the archives, and although this message appears, I couldn't find any resolution.
Anyone able to point me in the right direction ?
cheers
marty
(Asterisk 1.0.2 stable)
I've got further, by setting the tonezone in /etc/zaptel.conf to be 'us', which then delivers the caller id after the first ring, but makes the call sound like one made to the US (not really supprising).
Is anyone aware of how to tweak the settings, so I can retain UK call tones, but send out the callerid over the FXS port ?
I'm still guessing that it is due to the timing of the rings; I've tried setting 'DEFAULT_CIDRINGS 2' within the chan_zap.c, as suggested on one email thread, but that didn't solve this issue.
regards
marty
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
