Hello, I'm still kinda new to asterisk, but I'm trying to setup the following situation:
Aterisk running at port 5065, SER running at 5060 (done that, works fine) Load of SIP clients registering at SER (no problem), SER routing the SIP traffic to Asterisk (no problem). Incomming: *) Asterisk registers at a SIP provider which sends SIP traffic to my host, but not addressed to the registered user. *) Asterisk has to pickup that sip traffic and relay it to ser at the same host, but should not mess up the addressed user. *) Ser performs routing (no problem here) Outgoing: *) SER sends outbound traffic to Asterisk (no problem) *) Asterisk has to dial out to that number, but is challenged by my SIP provider, asterisk answers challenge (should work by setting up a peer) The reason for this setup is that my SIP Provider requires me to register at his proxy (SER can't do that) and has to authenticate outbound calls (SER can't do that either) However, I'm having troubles routing incoming sip traffic to SER, asterisks keeps messing up the form header (replacing it by the dialed context, ie [EMAIL PROTECTED] ) Any ideas if this setup is even possible? Kind regards, E. Versaevel _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users