I've tried using bri-stuff. I got everything compiled and installed but, it seems that the driver stalls our ISDN NTU provided by the operator.
As I said I'm running the 2.6.5 kernel. I have a HFC card and our operator uses alaw over EuroISDN. My zaptel.conf file is as follows: loadzone=us defaultzone=us span=1,1,3,ccs,ami bchan=1-2 dchan=3 Have you been able to get it going with BRI stuff? Regards Christiaan -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Alessio Focardi Sent: Thursday, November 18, 2004 3:51 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Voice in Asterisk with BRI ISDN Any properworking configurations yet? Hello Christiaan, Thursday, November 18, 2004, 2:40:00 PM, you wrote: CB> Hi all CB> � CB> If been working a while now trying to interface Asteriskswith CB> BRI ISDN.� I�ve tried various drivers without any success.� CB> I�mrunning a HFC passive ISDN board in 2.6.5 kernel. are you using the "bristuffed" version of asterisk ? http://www.junghanns.net/asterisk/ Exactly what is the problem you are experiencing ? Regards ! -- Best regards, Alessio mailto:[EMAIL PROTECTED] _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
