|
A T1 PRI should be B8ZS, ESF. The protocol
can be either 5ESS or NI2(not IN2). Either will work, primarily both ends
need to be setup for the same protocol, but I would go with NI2 as that is a
more 'universal' procotol(not switch specific like 5ESS).
Lyle
----- Original Message -----
Sent: Friday, November 19, 2004 8:22
AM
Subject: [Asterisk-Users] "Best" line
protocol for T1
Hello all,
I'm provisioning a T1-PRI for a Digium T410P with
my local TELCO. The TELCO has asked me to pick a line protocol
and has the option of several RBS protocols, like 5ESS (Lucent), IN2 and
others. The switch is a 5ESS, but the "normal" (according to the sales
rep) protocol is IN2. I see from the doc on zaptel, that many protocols
are supported. As I have a choice, is one of the PRI protocols "better"
that an another? I suspect that some protocols support features over
another but can't find much on the specifics. Recommendations and
reasons please.
Jon
_______________________________________________
Asterisk-Users
mailing
list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To
UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
|
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
