I've seen other posts about this problem, but I haven't found a solution.
I'm dumping eight call files into the "outgoing" directory at one time. Three of the calls are successful while the other five are lost. Here is the call file:
Channel: Zap/g2/3036701917 MaxRetries: 1000 RetryTime: 60 WaitTime: 45 Application: TxFAX Data: <filename>.tiff|caller
Note: All calls are going to the same fax machine, so some attempts on the second line will get a busy signal (there are two POTS lines in group 2).
In the messages log, I get many of the following set:
Unable to request channel Zap/g2/3036701917 Call failed to go through, reason 0 Can't change device with no technology!
In message log I also get: Call completed to Zap/g2/3036701917 for the successful calls.
Is there a workaround for this? If an outgoing call can't get a free line or gets a busy then I would want it to be retried later.
I'm using today's cvs and spandsp-pre6.
Thanks, Mike
P.S. I've changed the call file to "Channel: Zap/27/3036701917" so it uses only one outgoing POTS line. With this change, I'm still getting the "Unable to request..." message set, but I'm not losing call files (the calls are being retried). All eight faxes are successfully delivered using one outgoing line.
This tells me that getting a busy signal causes the call file to be removed and not retried. Bug?
Cheers,
-- Michael Welter Introspect Telephony Corp. Denver, Colorado US +1.303.674.2575 [EMAIL PROTECTED] www.introspect.com _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
