Martin List-Petersen schrieb:
On l�r, 2004-11-20 at 14:55, Tim Robinson wrote:
Not sure if I would call that card old or think it's the cause for theHi
I recommend you abandon the old card with the CAPI drivers and purchase a second HFC card.
stutter. The B1 is a active card. That should actually work better than
any passive (Fritz/A1 or HFC based card).
my general impression was that too, but most users seem to work with the setup tim recommends.
You can get them for around �10/EUR15 approx if you shop around on the net. You need to use zaphfc and the native zaptel and libpri drivers. You will need the bristuff fromHe has the bristuff, if you read his mail thorougly. However a old
http://www.junghanns.net/asterisk/downloads/bristuff-0.2.0-rc2b.tar.gz
which has a script to download and install the whole thing automatically.
version.
yeah, i first looked on the website only ...
Upgrading to asterisk stable + 0.2.0 rc2b is highly recommended. Scrap
that oldish CVS version of yours. It's from before 1.0 was released.
definitivly - after all gentoo contains 1.0.2 anyway (but without the needed patches).
i tried that - but unfortunatly the problem stays even with bristuff 0.2.0-rc2b.
next step i will try what tim recommends - its cheap hardware vs. expensive time anyway ;-)
i just have to wait for the second card.
thank you both for your input, i will feedback on this.
wbr.tja...
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
