Hi Guys,
I'm looking for a light on the next problem integrating an Asterisk server with a Panasonic PBX using a PRI.
The follow config has been working for two weeks and works almost fine, except for some little problems...
1- PSTN provides the E1/PRI (EuroISDN) 2- Asterisk receives the PRI 3- Asterisk provides a second PRI to Panasonic 4- Panasonic receives the asterisk PRI
People can receive and make calls on the Panasonic extensions using the Asterisk public PRI.
PROBLEM: The panasonic users can't use the REDIAL button on their phones, or send faxes, even sometimes we have echo on calls and we loose some of the digits that Panasonic send to Asterisk and there's no call at all.
Follow is the relevant config section of the files:
ZAPTEL.CONF
span=1,0,0,ccs,hdb3,crc4 span=2,0,0,ccs,hdb3,crc4
bchan=1-15 dchan=16 bchan=17-31
bchan=32-46 dchan=47 bchan=48-62
ZAPATA.CONF
context=pri-3122888 switchtype=euroisdn pridialplan=local usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes echotraining=800 group=1 callgroup=1 pickupgroup=1 immediate=yes musiconhold=default signalling = pri_cpe channel => 1-15 channel => 17-31
context=pri-panasonic immediate=yes group=2 overlapdial=yes signalling = pri_net channel => 32-46 channel => 48-62
Note: The public PRI is signalled PRI_CPE and the one offered to Panasonic is signalled PRI_NET
EXTENSIONS.CONF
; ; Context PRI-3122888 ; [pri-3122888] ; include => default ; exten => s,1,Answer ; Answer the line exten => s,2,Dial(Zap/g2/2888) ; Dial to Panasonic and sends the 4 DID digits needed for Panasonic exten => s,3,Hangup ; ; Context PRI-Panasonic ; [pri-panasonic] ; include => default ; exten => s,1,Answer ; Answer the line exten => s,2,DigitTimeout,2 ; Set Digit Timeout to 5 seconds exten => s,3,ResponseTimeout,2 ; Set Response Timeout to 10 seconds
exten => _X.,1,Dial(Zap/g1/${EXTEN})
exten => _X.,2,CongestionI had to use that config on the panasonic context as an Automated Attendant because on other ways we receive incomplete and scrambled digits from panasonic, and with this I don't know the caller_id of the panasonic extension that made a call.
I would appreciate any idea about this.
Alfred Certain GECKO www.gecko-soft.com
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
