I have a very newbie question, I asked this at the digium support, but they did not answered yet, so I hope you can help.
I just bought the digium developer kit (TDM400P), installed everything, all messages seems ok, but I can't make it work.
* a normal telephone and a line connected to the board
* modprobe wcfxs = ok
leds go on an I hear a small click at the phone.
* ztcfg = ok (two channels found )
Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 04: FXS Kewlstart (Default) (Slaves: 04)
* asterisk running with all verbose in console and remote mode.
only chan_skinny and chan_phone had problems to load.
* The config files seems ok.
Problem:
According to the config files, by pressing 9 I should have the line to dial outside, but absolutely nothing happens. I tried the other numbers, with no response, The phone is mute (only a subliminar energy sound and the dtmf sound when I press the keys).
How can I find what I did wrong? the verbose and the messages at /var/log/messages says everything is ok.
When it was compiling, there was a little issue at the zaptel drivers, and I had to change a inline function position to compile correctly. (source from cvs)
I'm in brazil, can this be some problem with the telephone line? I changed the setting to use loadzone and defaultzone "br", but this not worked either.
Can I execute something at the CLI to hear it at the phone, just to see if everything is ok?
[]s, gandhi
--
Ricardo Andere de Mello
Presidente do Quilombo Digital
55 11 3271-7928
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
