On December 3, 2004 12:43 pm, Steven Critchfield wrote: > Is it possible that your PSU isn't up to the task? If you aren't running > a 400 or 500 watt PSU, I would be suspect of the PSU. That error message > was attributed to not getting enough power before they put a power plug > on the board itself. Now you know you aren't getting strangled by the > PCI bus, but it still might not be enough power if you PSU isn't up to > snuff to hold the power stable and high enough.
I fully believe that that error is incorrect. I have been running into these problems on rev E, F and H cards on all manner of systems, from P90 with a 450W power supply to the Supermicro server chassis I hvae upstairs with triple-redundant power. Hell I even put a 100MHz DSO on the +12V rail and there is nothing there, the voltage doesn't move more than a dozen or so mV from +12.00V. For some it may be a power issue, but I believe there is either a power *distribution* issue on the TDM4XXP carrier, an electrical error on the FXS modules or even some kind of driver issue. -A. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
