Hi Martin, my router is a vanilla 2600, not the V model, as far as I know it has no special SIP features, other than SIP seeming to crash it when a SIP call is made from the internet to the * box here! :(
I mentioned the problem on the draytek forum but I;ve not contacted Draytek themselves per se. One big difference is you are using PPPoE and I'm using PPPoA, unfortunately! I've tried several different firmware, all UK specific, still the same. thanks. Mike On Fri, 03 Dec 2004 23:39:50 +0000, Martin List-Petersen <[EMAIL PROTECTED]> wrote: > > The Vigor 2600 should just do fine, I have 2 Vigor 2600VGi's in use with > Asterisk (IAX though) and Handytone's (SIP, not connected to the > Asterisk) in use (router PPPoE though, connected to NetSource here in > Ireland). Firmware is 2.5.3 (i think Draytek withdrew that again because > of GUI problems), but 2.5.2 was fine, too. > > The router is SIP aware, so actually you shouldn't think much about NAT > setup etc, it should work straight away. Have you talked with Draytek > about that problem ? Maybe they have heard about it before and have a > solution. > > Besides, is it the UK specific firmware you have loaded ? > > Sl�n leat, > Martin List-Petersen > Dublin, Eire > (contact info on --> http://www.marlow.dk/) > > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
