Michael Vogel wrote: > Hi! > > The X100P is working - partly. I can make outgoing calls. But the card > has got a problem detecting incoming calls. Even in verbose mode I > don't see any hint that the card detects a call. > > At the moment I'm using the card behind my old ISDN telephone system. > Could it be a problem with the line voltage? > > Can I adjust anything when loading the kernel module? >
I presume it is a clone card you have, it behaves differently when having opermode=1 set. The original X100P uses linear (DC) termination and the clone, when set to CTR21, uses complex (AC+DC) termination, this means the signal gain is not comparable. The current wcfxo driver is NOT using any of the registers to determine RING/OFFHOOK/etc., these indications are found by "listening to the line" so the rxgain/txgain settings in zapata.conf does matter. By using ztmonitor (described here http://www.voip-info.org/wiki-Asterisk+x100p+echotraining) you can train the "ears" of Asterisk. /Soren _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
