Dnia poniedziałek, 6 grudnia 2004 23:09, Stefan Tichy napisał: I've run it on i4l.
> > > > Thanks again for any help I'm Asterisk newbie. > > There is a Linux 2.6 and mISDN HowTo: > > http://rcum.uni-mb.si/~uvp00845b/ > I can't compile chan_misdn I've compiled chan_capi - but I can't force it to work. > In this text the avmfritz module is used. In case of one hfc card it > should be: > > modprobe hfcpci protocol=0x2 layermask=0x1f > > thanks :) > If you want to use chan_capi, it has to be TE mode. NT mode is not > possible. > > Hfc based ISDN cards will generate lots of interrupts. Interrupt > sharing will cause problems. > > A solution would be to use a quadBRI card instead of the 4 HFC cards > and bristuff instead of misdn/chan_capi. Thank you again, but what to do if it's imposible? _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
