if you are running the latest firmware then click on the tab at the top for advanced settings.
----- Original Message ----- From: "david kwok" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, December 08, 2004 1:12 AM Subject: [Asterisk-Users] dead BT100 > My BT100 hangs during a firmware upgrade. After numerous retry, I finaly > got it boot up again. I can ping the phone. However it seems to have > lost the network setup. > > Using the web interface, it displays an abbreviated web page with logon, > password, ip address, router and dns details. It misses all the other > information like codec, dtmf, sip server etc. At bottom it has time zone > and day light settings. That is it. It is not registering with Asterisk > and can only be contact with ping and web. I have tried and uploaded a > configuration file, cfg000b82600. But it does not make any difference. > > I have read other postings about reconnecting to tftp server to bring > back to life. I think it did complete its upgrade from the tftp server. > But there seems to be something missing here. > > Has anyone have this near dead experience and bring it back to life? > > David Kwok > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
