Andrei,
I'm interested too. Any chance to put the archive in a ftp site?.
Jorge Mendoza
Andrei (MPI) wrote:
Adam,
I can send you 1.3.4 firmware. Please let me know if you can accept zip archive of 10Mb to your email address.
But please consider that you may have to upgrade to 1.3.1 first (with 2.5.0 boot rom), if you have not done so. The 1.3.1 files are available here:
http://www.freedomphones.net/polycom/files/
Thank you, Andrei
Adam Robins wrote:
As I am not a Polycom dealer, I cannot download the software from their site. Any alternative locations you know of? Thanks. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tor Setane Sent: Thursday, December 09, 2004 7:47 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [Asterisk-Users] RE: Polycom 500 - Dialtone while connected
I just set up a Polycom 500 on *. Every few calls I make, the >call
connects and the receiving party can hear me (thru >Broadvoice), but I still get ringing on my end, as if they never >picked up. * logs look just fine. Does any one have any >suggestions? Thanks.
________________________________________________________________________
Adam S. Robins
Executive Vice President & CIO
Hi Adam, that should be fixed in sw.ver.1.3.4 from Polycom. "ID Issue 9122 Local ringback tone continues after early media received". Worked for us.
-Tor. _______________________________________________
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
