Hello list ,
I�m putting to work a new asterisk box. I�m running * 1.0.3 with (one ) Wildcard TDM ( 2FXS* 2FXO) and (one) E-100P.
Both boards are working well. ztcfg don�t show me any error. zttool list both cards as "OK"
But when i run asterisk on verbose mode i get those errors :
[chan_zap.so] => (Zapata Telephony)
== Parsing '/etc/asterisk/zapata.conf': Found
-- Registered channel 1, FXO Kewlstart signalling
-- Registered channel 2, FXO Kewlstart signalling
-- Registered channel 3, FXS Kewlstart signalling
-- Registered channel 4, FXS Kewlstart signalling
Dec 11 13:27:48 ERROR[1555]: chan_zap.c:9422 setup_zap: Unknown signalling method 'pri_net'
Dec 11 13:27:48 ERROR[1555]: chan_zap.c:6209 mkintf: Signalling requested is FXS Kewlstart but line is in PRI Signalling signalling
Dec 11 13:27:48 ERROR[1555]: chan_zap.c:9141 setup_zap: Unable to register channel '5-19'
Dec 11 13:27:48 WARNING[1555]: loader.c:345 ast_load_resource: chan_zap.so: load_module failed, returning -1
== Unregistered channel type 'Tor'
== Unregistered channel type 'Zap'
-- Unregistered channel 1
-- Unregistered channel 2
-- Unregistered channel 3
-- Unregistered channel 4
Dec 11 13:27:48 WARNING[1555]: loader.c:440 load_modules: Loading module chan_zap.so failed!
--- My zaptel.conf ---
# configuracoes para o zaptel # placa TDM c/ 2 FXs e 2 Fxo
fxoks=1-2 fxsks=3-4
# Placa E100 / E1 - 30 canais de voz (FXO )
span=1,1,0,ccs,hdb3 bchan=5-19 dchan=20 bchan=21-35 defaultzone=br loadzone=br
--- My Zapata.conf --
[channels]
; As configuracoes abaixo fazem referencia a ; placa Wildcard TDM com 2 canais FXS w ; 2 canais FXO
signalling=fxo_ks
echocancel=128 ; You can set this to 32, 64, or 128, tweak to your needs.
echocancelwhenbridged=yes
echotraining=800 ; Asterisk trains to the beginning of the call, number is in milliseconds
callerid=asreceived
group=1
context=fxs ; Points to the default context of your extensions.conf
channel => 1-2
signalling=fxs_ks
;callerid=asreceived
echocancel=128 ; You can set this to 32, 64, or 128, tweak to your needs.
echocancelwhenbridged=yes
echotraining=800 ; Asterisk trains to the beginning of the call, number is in milliseconds
group=2
context=incoming
channel=> 3-4 ; Again if you only have one FXO module remove the '-4'
; ; ; ; ; As Configuracoes abaixo se referem a placa E1 ; que disponibiliza 30 canais FXO
;group=3 switchtype=euroisdn ;signalling=pri_net ;context=incoming ;channel=> 5-19,21-35 ;channel=> 21-35
Any ideas ::: ???????????
Best Regards ,
-Jefferson Carvalho
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
