What's the cisco box,52 / 53; version ios? can you post a config dump? Regards
Michael Hatzis 0421 476 211 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jorge Verastegui G Sent: Monday, 13 December 2004 10:42 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] Cisco AS5XXX to asterisk debugging. Excuse the insistence but I am more than one week with this problem, and I do not have any idea to solve it. You know if the configuration with GK in the Cisco, can be interfering with the RTP traffic? Thanks in advance On Fri, 2004-12-10 at 08:37, Tenorio, Leandro wrote: > Pls, post your Cisco and * config files. > > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Jorge > Verastegui G > Sent: Friday, December 10, 2004 12:30 AM > To: [EMAIL PROTECTED] > Subject: [Asterisk-Users] Cisco AS5XXX to asterisk debugging. > > Hi, > > I have a serious problem to configure Cisco AS5XXX and Asterisk , > > I trying to use asterisk for > > PSTN(A)----> Cisco AS5xxx ----> ASterisk---->PSTN(B) > > (No Nat, no Firewall) > > I hear (on the PSTN(A)) clearly what the other person is saying, but the > other person (on the PSTN(B) side) hears nothing from PSTN(A). > > I use tcpdump for debug de rtp trafic, and ouput contains > > > 19:06:00.741293 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], > proto 17, length: 60) x.x.x.x.19926 > y.y.y.y.18974: [no cksum] UDP, > length 32 > 19:06:00.763133 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], > proto 17, length: 60) x.x.x.x.19926 > y.y.y.y.18974: [no cksum] UDP, > length 32 > 19:06:00.740415 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], > proto 17, length: 60) x.x.x.x.19926 > y.y.y.y.18974: [no cksum] UDP, > length 32 > 19:06:00.810312 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], > proto 17, length: 60) x.x.x.x.19926 > y.y.y.y.18974: [no cksum] UDP, > length 32 > 19:06:00.860314 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], > proto 17, length: 60) x.x.x.x.19926 > y.y.y.y.18974: [no cksum] UDP, > length 32 > 19:06:00.980351 IP (tos 0x0, ttl 64, id 180, offset 0, flags [DF], > proto 17, length: 60) x.x.x.x.19926 > y.y.y.y.18974: [no cksum] UDP, > length 32 > 19:06:01.000313 IP (tos 0x0, ttl 64, id 181, offset 0, flags [DF], > proto 17, length: 60) x.x.x.x.19926 > y.y.y.y.18974: [no cksum] UDP, > length 32 > 19:06:01.014822 IP (tos 0x68, ttl 255, id 1, offset 0, flags [none], > proto 17, length: 164) y.y.y.y.18975 > x.x.x.x.19927: UDP, length 136 > 19:06:01.020312 IP (tos 0x0, ttl 64, id 182, offset 0, flags [DF], > proto 17, length: 60) x.x.x.x.19926 > y.y.y.y.18974: [no cksum] UDP, > length 32 > 19:06:01.040302 IP (tos 0x0, ttl 64, id 183, offset 0, flags [DF], > proto 17, length: 60) x.x.x.x.19926 > y.y.y.y.18974: [no cksum] UDP, > length 32 > 19:06:01.060343 IP (tos 0x0, ttl 64, id 184, offset 0, flags [DF], > proto 17, length: 60) x.x.x.x.19926 > y.y.y.y.18974: [no cksum] UDP, > length 32 > 19:06:01.083311 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], > proto 17, length: 60) x.x.x.x.19926 > y.y.y.y.18974: [no cksum] UDP, > length 32 > 19:06:01.128314 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], > proto 17, length: 60) x.x.x.x.19926 > y.y.y.y.18974: [no cksum] UDP, > length 32 > 19:06:01.130316 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], > proto 17, length: 60) x.x.x.x.19926 > y.y.y.y.18974: [no cksum] UDP, > length 32 > 19:06:01.165318 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], > proto 17, length: 60) x.x.x.x.19926 > y.y.y.y.18974: [no cksum] UDP, > length 32 > 19:06:01.186312 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], > proto 17, length: 60) x.x.x.x.19926 > y.y.y.y.18974: [no cksum] UDP, > length 32 > > > Where > > x.x.x.x = ip address of Astersik > y.y.y.y = ip address of Cisco > > > Two types of codecs were proven ( ulow, g729 ). > > When use the Asterisk with Sip phones everything works well. > > SipPhone------>Asterisk------->PSTN(B) > > The configurations, are the usual ones (from the wiki). the version of > asterisk is 1.0.3, the linux is FC2. > > > Please help me. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
