>There was no SETUP message in that debug. You need to start the debug
>before you place your inbound call from the telco so that I can see
>the SETUP message that usually contains the IE that has this information
>in it.
>Matthew Fredrickson
Sorry Had the wrong debug options on, this shows all of the call setup.
Thanks Again
Chris.
< Protocol Discriminator: Q.931 (8) len=42
< Call Ref: len= 2 (reference 852/0x354) (Originator)
< Message type: SETUP (5)
< [04 03 80 90 a2]
< Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability:
Speech (0)
< Ext: 1 Trans mode/rate: 64kbps, circuit-mode
(16)
< Ext: 1 User information layer 1: u-Law (34)
< [18 03 a9 83 96]
< Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive Dchan: 0
< ChanSel: Reserved
< Ext: 1 Coding: 0 Number Specified Channel Type: 3
< Ext: 1 Channel: 22 ]
< [6c 0c 21 83 38 30 31 37 38 37 34 39 30 36]
< Calling Number (len=14) [ Ext: 0 TON: National Number (2) NPI:
ISDN/Telephony Numbering Plan (E.164/E.163) (1)
< Presentation: Presentation allowed of network
provided number (3) '8017874906' ]
< [70 0b a1 38 30 31 34 33 37 37 38 36 30]
< Called Number (len=13) [ Ext: 1 TON: National Number (2) NPI:
ISDN/Telephony Numbering Plan (E.164/E.163) (1) '8014377860' ]
-- Making new call for cr 852
-- Processing Q.931 Call Setup
-- Processing IE 4 (cs0, Bearer Capability)
-- Processing IE 24 (cs0, Channel Identification)
-- Processing IE 108 (cs0, Calling Party Number)
-- Processing IE 112 (cs0, Called Party Number)
> Protocol Discriminator: Q.931 (8) len=10
> Call Ref: len= 2 (reference 852/0x354) (Terminator)
> Message type: CALL PROCEEDING (2)
> [18 03 a9 83 96]
> Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive Dchan: > 0
> ChanSel: Reserved
> Ext: 1 Coding: 0 Number Specified Channel Type: 3
> Ext: 1 Channel: 22 ]
> Protocol Discriminator: Q.931 (8) len=9
> Call Ref: len= 2 (reference 852/0x354) (Terminator)
> Message type: ALERTING (1)
> [1e 02 81 88]CLI>
> Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0
> Location: Private network serving the local user (1)
> Ext: 1 Progress Description: Inband
> information or appropriate pattern now available. (8) ]
< Protocol Discriminator: Q.931 (8) len=9
< Call Ref: len= 2 (reference 852/0x354) (Originator)
< Message type: DISCONNECT (69)
< [08 02 80 90]
< Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location:
User (0)
< Ext: 1 Cause: Normal Clearing (16), class = Normal Event
(1) ]
-- Processing IE 8 (cs0, Cause)
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect Indication,
peerstate Disconnect Request
> Protocol Discriminator: Q.931 (8) len=9
> Call Ref: len= 2 (reference 852/0x354) (Terminator)
> Message type: RELEASE (77)
> [08 02 81 90]
> Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location:
> Private network serving the local user (1)
> Ext: 1 Cause: Normal Clearing (16), class = Normal Event
> (1) ]
< Protocol Discriminator: Q.931 (8) len=5
< Call Ref: len= 2 (reference 852/0x354) (Originator)
< Message type: RELEASE COMPLETE (90)
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
