If you only have a couple of FXO lines, then you can try a TDM400P.
Greg
Robert Augustyn wrote:
Gregory, Thanks for your input I had gove through a lot on that web site and I am still missing someting, I think ...I am not sure where and how I get FXOs configured? If I use T100P to connect to Adtran where am I going to connect the T1 comming from my Telco?
Thanks in advance. robert
--- Gregory Junker <[EMAIL PROTECTED]> wrote:
http://www.voip-info.org/wiki-Asterisk+Channel+Bank
Digium T100P, T1 cable to Adtran T1 port, extensions
to Adtran FXS interfaces. Follow the instructions on the Wiki for
configuring the T100P both in /etc/asterisk/zapata.conf and
/etc/zaptel.conf. Configure the ports on the Adtran per the Adtran manual and
you should be off and running.
Greg
Robert Augustyn wrote:
Hi,
I have been looking on that unit to be used as
source of fxs ports.
Now I am not sure how I can get * box talking
to it?
Thanks for advice.
robert
------------------------------------------------------------------------
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
