|
> > >
pri show span 1
> > > > pri show span 1 > > Primary D-channel: 24 > > Status: Provisioned, Down, Active > > The "Down" indicates the d-chan is down. Call Verizon and have them > activate it. (Its not uncommon for telco's to deactivate the d-chan > when a circuit hasn't been fully turned up. It reduces the number of > alarms they have to deal with.) Aha! That would make sense. We ordered the PRI a while back for a new office space, but construction was delayed, and it has been sitting idle for more than a month. > > zapata.conf: > > switchtype = national > > context = incoming > > signalling = pri_cpe > > group = 1 > > channel => 1-23 > > In the above for US-based PRI's, you'll want to add: > pridialplan=unknown > echocancel=yes > echotraining=yes ; try =800 if there is still echo with =yes > echocancelwhenbridged=yes > > The pridialplan= statement essentially tells the Verizon switch > what type of dialplan you expect to use. 'unknown' allows you to > send 7 digits, 1+ 10 digits, etc. 'national' restricts international > long distance, while 'international' imposes other restrictions. > The added zapata.conf parameters are not the cause for your d-chan > being down, however after that issue is resolved you'll bump into > these parameters. > > After the above items are resolved and things are closer to working, > you'll need to know how many digits (if any) Verizon is going to be > sending to you for inbound calls. If you asked them to provide DID > numbers, then the number of digits received will become important > for you to define extensions.conf entries associated with your > context=incoming statement above. If they send you 4 digits, then > use extension.conf test entries like: > [incoming] > include => valid-did > include => invalid-did > > [valid-did] > exten => 1234,1,Goto(local-extns,1234,1) > exten => 1235,1,Goto(local-extns,1235,1) > > [invalid-did] > exten => _.,1,Answer > exten => _.,2,Wait(1) > exten => _.,3,Playback(the-number-u-dialed) > exten => _.,4,Playback(not-yet-assigned) > exten => _.,5,Wait(2) > exten => _.,6,Hangup > > You will also want to talk to a Verizon switch tech about how to > handle outbound CallerID. E.g., do you want to send CallerIDNum to > Verizon matching each originating DID number, or, map all outbound > calls to a single CallerIDNum? They will also set a common > CallerIDName for all outbound calls, but probably won't allow you > to send the name to them. Wow, a wealth of information! Thanks, Rich, for all the dialplan and echo cancel stuff. I certainly would not have thought to cover invalid DID'd or outbound CallerID! This will save me a GREAT deal of time (which is suddenly a huge premium for me). Thanks, Noah |
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
